Tennant 6080
Moderator: Tom_in_CA
-
- Posts: 3
- Joined: Mon Sep 02, 2013 3:39 am
- Anti-Spam Number: 3
Tennant 6080
Can anyone help me? I have a battery powered Tennant 6080. When I turn the key it starts to run however the key will not remain it the on position on its own. Any thoughts?
- Dwan
- Forum Administrator
- Posts: 157
- Joined: Tue Jul 26, 2005 3:06 pm
- Anti-Spam Number: 1
- Location: Juneau, Alaska
- Contact:
Re: Tennant 6080
Anyone Know what kind of switch this machine has that can help?
Not knowing the machine and just guessing I would say replace the switch. Most equipment switches are conman and NAPA or any good parts store should carry them. Remove the switch take a picture of the wiring on the back so you can have something to go by when wiring the new one in.
Not knowing the machine and just guessing I would say replace the switch. Most equipment switches are conman and NAPA or any good parts store should carry them. Remove the switch take a picture of the wiring on the back so you can have something to go by when wiring the new one in.
-
- Posts: 3
- Joined: Mon Sep 02, 2013 3:39 am
- Anti-Spam Number: 3
Re: Tennant 6080
Thanks for your help - I will take photo and try a new switch.
-
- Posts: 3
- Joined: Mon Sep 02, 2013 3:39 am
- Anti-Spam Number: 3
Re: Tennant 6080
I have removed the switch! - It has 5 terminals marked L1G, -M, ST,+M, B and a white painted number 704 on it. It is 1 1/2" across on the terminal end and 3/4" on the bit that key inserts into. Any ideas where I can get a replacement - im in the UK.
- Dwan
- Forum Administrator
- Posts: 157
- Joined: Tue Jul 26, 2005 3:06 pm
- Anti-Spam Number: 1
- Location: Juneau, Alaska
- Contact:
Re: Tennant 6080
Any good auto or marine parts store.