Page 1 of 1

Tennant 6080

Posted: Mon Sep 02, 2013 3:43 am
by nickheckford
Can anyone help me? I have a battery powered Tennant 6080. When I turn the key it starts to run however the key will not remain it the on position on its own. Any thoughts?

Re: Tennant 6080

Posted: Tue Sep 03, 2013 9:01 pm
by Dwan
Anyone Know what kind of switch this machine has that can help?
Not knowing the machine and just guessing I would say replace the switch. Most equipment switches are conman and NAPA or any good parts store should carry them. Remove the switch take a picture of the wiring on the back so you can have something to go by when wiring the new one in.

Re: Tennant 6080

Posted: Wed Sep 04, 2013 4:08 am
by nickheckford
Thanks for your help - I will take photo and try a new switch.

Re: Tennant 6080

Posted: Wed Sep 04, 2013 4:33 am
by nickheckford
I have removed the switch! - It has 5 terminals marked L1G, -M, ST,+M, B and a white painted number 704 on it. It is 1 1/2" across on the terminal end and 3/4" on the bit that key inserts into. Any ideas where I can get a replacement - im in the UK.

Re: Tennant 6080

Posted: Wed Sep 04, 2013 7:39 am
by Dwan
Any good auto or marine parts store.